Allied Telesis AR450S Bedienungsanleitung PDF herunterladen (Seite 39)

Switching on the AR440S, AR441S and AR450S SHOW SWITCH FDB 3-39

Software Release 2.6.6

C613-03079-00 REV A

Related Commands RESET SWITCH

SHOW SWITCH

SHOW SWITCH FDB

Syntax SHOW SWITCH FDB [ADDRESS=macadd][PORT={port-list|ALL}]

[STATUS={STATIC|DYNAMIC}]

where:

■ macadd is an Ethernet six-octet MAC address, expressed as six pairs of

hexadecimal digits delimited by hyphens.

■ port-list is a port number, a range of port numbers (specified as n-m), or a

comma separated list of port numbers and/or ranges. Port numbers start

at 1 and end at m, where m is the highest numbered Ethernet port.

Description This command displays the contents of the Forwarding Database (see

Figure 3-10 on page 3-39 and Table 3-16 on page 3-40).

The ADDRESS parameter specifies the MAC address of the device that the

Forwarding Database is to display.

The PORT parameter specifies entries to be displayed in the Forwarding

Database that were learned from the specified port.

The STATUS parameter specifies whether to display static filter entries or

dynamically learned filter entries.

Figure 3-10: Example output from the SHOW SWITCH FDB command.

Switch Forwarding Database

----------------------------------------------------

MAC Address Port Status

----------------------------------------------------

00-00-c0-1d-2c-f8 1 dynamic

00-00-c0-71-e0-e4 1 dynamic

00-00-cd-00-45-c7 CPU static

00-00-cd-00-a4-d6 1 dynamic

00-00-cd-00-ab-dc 1 dynamic

00-60-b0-ac-18-51 1 dynamic

00-90-27-23-a4-e9 1 dynamic

00-90-27-32-ad-61 1 dynamic

00-90-27-76-8a-55 1 dynamic

00-90-27-76-9a-99 1 dynamic

00-90-27-87-a5-22 1 dynamic

00-90-27-bd-c8-93 1 dynamic

00-90-27-bd-c9-7f 1 dynamic

00-90-27-d0-ae-c2 1 dynamic

----------------------------------------------------

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 47 48

Keine Kommentare

Allied Telesis AR450S Bedienungsanleitung Seite 39