Allied Telesis AR450S Bedienungsanleitung PDF herunterladen (Seite 36)

3-36 SHOW SWITCH DEBUG AR400 Series Router Software Reference

Software Release 2.6.6

C613-03079-00 REV A

Figure 3-7: Example output from the SHOW SWITCH command.

Example To display the configuration of the switch module, use the command:

SHOW SWITCH

Related Commands RESET SWITCH

SHOW SWITCH DEBUG

Syntax SHOW SWITCH DEBUG

Description This command displays debugging information for switching (see Figure 3-8

on page 3-36 and Table 3-14 on page 3-37).

Figure 3-8: Example output from the SHOW SWITCH DEBUG command.

Switch Configuration

-----------------------------------------------------------

Switch Address ............. 00-00-cd-00-7a-47

Number of Fixed Ports ...... 5

Learning ................... ON

Ageing Timer ............... ON

Ageing Time ................ 304

UpTime ..................... 00:10:32

------------------------------------------------------------

Table 3-13: Parameters displayed in the output of the SHOW SWITCH

command .

Parameter Meaning

Switch Address The MAC address of the router.

Number of Fixed Ports The number of fixed Ethernet switch ports.

Learning Whether the router’s dynamic learning and updating of

the Forwarding Database is enabled; one of “ON” or

“OFF”.

Ageing Timer Whether the ageing timer is enabled; one of “ON” or

“OFF”. The time that a MAC address entry remains in the

address lookup cannot be altered.

Ageing Time The value in seconds of the ageing timer, after which a

dynamic entry is removed from the Forwarding Database.

Uptime The time in hours:minutes:seconds since the router was

last powered up, rebooted, or restarted. Uptime is the

same as the value of the MIB object sysUpTime.

Enabled Switch Debug Modes Output Timeout

----------------------------------------------------------

DMA 16 12345

----------------------------------------------------------

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 47 48

Keine Kommentare

Allied Telesis AR450S Bedienungsanleitung Seite 36