Allied Telesis AR450S Bedienungsanleitung PDF herunterladen (Seite 23)

Switching on the AR440S, AR441S and AR450S CREATE VLAN 3-23

Software Release 2.6.6

C613-03079-00 REV A

Examples To add port 4 to the port-based marketing VLAN, use the command:

ADD VLAN=marketing PORT=4

To add port 2 to the training VLAN as a tagged port, use the command:

ADD VLAN=training PORT=2 FRAME=TAGGED

Related Commands DELETE VLAN PORT

SHOW VLAN

CREATE VLAN

Syntax CREATE VLAN=vlan-name VID=2..4094

where:

■ vlan-name is a unique name for the VLAN 1 to 15 characters long. Valid

characters are uppercase and lowercase letters, digits (0-9), the underscore

character (“_”), and the hyphen ( - ). The vlan-name cannot be a number or

ALL.

Description This command creates a VLAN with a unique name and VLAN Identifier

(VID). To change the VID of an existing VLAN, that VLAN must be destroyed

and created again with the modified VID. A maximum of 64 VLANs, including

the default VLAN, can be created with any VID from 2 to 4094.

The VLAN parameter specifies a unique name for the VLAN. This name can be

more meaningful than the VID, to make administration easier. The VLAN

name is used internally; it is not transmitted to other VLAN-aware devices, or

used in the Forwarding Process or stored in the Forwarding Database. If the

VLAN name begins with “vlan” and ends with a number, for instance “vlan1”

or “vlan234”, then the number must be the same as the VID specified. This

avoids confusion when identifying to which VLAN subsequent commands

refer.

The VID parameter specifies a unique VLAN Identifier for the VLAN. If tagged

ports are added to this VLAN, the specified VID is used in the VID field of the

tag in outgoing frames. If untagged ports are added to this VLAN, the

specified VID acts as an identifier for the VLAN in the Forwarding Database.

The default port based VLAN has a VID of 1.

Examples To create a VLAN named marketing with a VLAN Identifier of 2, use the

command:

CREATE VLAN=marketing VID=2

To create a VLAN named vlan42, which must have a VID of 42, use the

command:

CREATE VLAN=vlan42 VID=42

Related Commands DESTROY VLAN

SHOW VLAN

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

Keine Kommentare

Allied Telesis AR450S Bedienungsanleitung Seite 23