Allied Telesis AR450S Bedienungsanleitung PDF herunterladen (Seite 24)

3-24 DELETE VLAN PORT AR400 Series Router Software Reference

Software Release 2.6.6

C613-03079-00 REV A

DELETE VLAN PORT

Syntax DELETE VLAN={vlan-name|1..4094} PORT={port-list|ALL}

where:

■ vlan-name is a unique name for the VLAN 1 to 15 characters long. Valid

characters are uppercase and lowercase letters, digits (0-9), the underscore

character (“_”), and the hyphen ( - ). The vlan-name cannot be a number or

ALL.

■ port-list is a port number, a range of port numbers (specified as n-m), or a

comma separated list of port numbers and/or ranges. Port numbers start

at 1 and end at m, where m is the highest numbered Ethernet port.

Description This command deletes ports from the specified VLAN. An untagged port can

be deleted from a VLAN if the port is still a member of a VLAN after the

deletion has occurred. If the port does not belong to any VLAN as a tagged

port then the port is implicitly added to the default VLAN as an untagged port.

It is not possible to delete a port that belongs only to the default VLAN as an

untagged port.

A tagged port can be deleted from a VLAN if the port is still a member of a

VLAN afterwards.

The VLAN parameter specifies the name or numerical VLAN Identifier of the

VLAN. The name is not case sensitive. The VLAN must already exist.

The PORT parameter specifies the ports to be deleted from the VLAN. If ALL is

specified, then all ports belonging to the VLAN are deleted. If the command

would succeed on a subset of the ports specified, but cause an error on the

others, then the command as a whole fails and has no effect.

Example To delete port 3 from the marketing VLAN, use the command:

DELETE VLAN=marketing PORT=3

Related Commands ADD VLAN PORT

SHOW VLAN

DESTROY VLAN

Syntax DESTROY VLAN={vlan-name|2..4094|ALL}

where:

■ vlan-name is a unique name for the VLAN 1 to 15 characters long. Valid

characters are uppercase and lowercase letters, digits (0-9), the underscore

character (“_”), and the hyphen ( - ). The vlan-name cannot be a number or

ALL or DEFAULT.

Description This command destroys the specified static VLAN or all static VLANs in the

router. The default VLAN, with a VID of 1, cannot be destroyed. If ALL is

specified then all VLANs except the default VLAN are destroyed. A VLAN

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 47 48

Keine Kommentare

Allied Telesis AR450S Bedienungsanleitung Seite 24