Allied Telesis AR450S Bedienungsanleitung PDF herunterladen (Seite 22)

3-22 ADD VLAN PORT AR400 Series Router Software Reference

Software Release 2.6.6

C613-03079-00 REV A

Command Reference

This section describes the commands available to configure and manage the

switching functions on the router.

See Conventions on page xciii of Preface in the front of this manual for details of

the conventions used to describe command syntax. See Appendix A, Messages

for a complete list of messages and their meanings.

ADD VLAN PORT

Syntax ADD VLAN={vlan-name|1..4094} PORT={port-list|ALL}

[FRAME={TAGGED|UNTAGGED}]

where:

■ vlan-name is a unique name for the VLAN 1 to 15 characters long. Valid

characters are uppercase and lowercase letters, digits (0-9), the underscore

character (“_”), and the hyphen ( - ). The vlan-name cannot be a number or

ALL.

■ port-list is a port number, a range of port numbers (specified as n-m), or a

comma separated list of port numbers and/or ranges. Port numbers start

at 1 and end at m, where m is the highest numbered Ethernet port.

Description This command adds ports to the specified VLAN.

The VLAN parameter specifies the name or numerical VLAN Identifier (VID)

of the VLAN. The name is not case sensitive although the case is preserved for

display purposes. The VLAN must already exist. By default, all ports belong to

the default VLAN, with a VID of 1.

The PORT parameter specifies the ports. All the ports in a trunk group must

have the same VLAN configuration. If the command would succeed on a

subset of the ports specified, but cause an error on the others, then the

command as a whole fails and has no effect.

The FRAME parameter specifies whether a VLAN tag header is included in

each frame transmitted on the specified ports. If TAGGED is specified, a VLAN

tag is added to frames prior to transmission. The port is then called a tagged

port for this VLAN.

If UNTAGGED is specified, the frame is transmitted without a VLAN tag. The

port is then called an untagged port for this VLAN. A port can be untagged for

one and only one of the VLANs to which it belongs, or for none of the VLANs

to which it belongs. A port can have the FRAME parameter set to TAGGED for

zero or more VLANs to which it belongs. It is not possible to add an untagged

port to a VLAN when the port is already present in another port-based VLAN,

except the default VLAN.

When the port is an untagged member of the default VLAN and you add it as

an untagged port to another VLAN, it is deleted from the default VLAN. The

default is UNTAGGED.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied Telesis AR450S Bedienungsanleitung Seite 22

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Allied Telesis AR450S