Allied Telesis AR450S Bedienungsanleitung PDF herunterladen (Seite 37)

Switching on the AR440S, AR441S and AR450S SHOW SWITCH COUNTER 3-37

Software Release 2.6.6

C613-03079-00 REV A

Example To display debugging information, use the command:

SHOW SWITCH DEBUG

Related Commands DISABLE SWITCH DEBUG

ENABLE SWITCH DEBUG

SHOW SWITCH COUNTER

Syntax SHOW SWITCH COUNTER

Description This command displays counters associated with the router (see Figure 3-9 on

page 3-37 and Table 3-15 on page 3-38).

Figure 3-9: Example output from the SHOW SWITCH COUNTER command.

Table 3-14: Parameters in the output of the SHOW SWITCH DEBUG command.

Parameter Meaning

Enabled Switch Debug Modes The debugging option for the router; one of “ARL”, “DMA”,

“M6”, “PHY” or “None”.

Output The output device for the router; shown when a debug mode

is presently enabled.

Timeout The time in seconds that the debugging options for the

router are enabled; shown when a debug mode is presently

enabled.

Switch Counters

---------------------------------------------------------------------------

Switch instance: 0

Packet DMA counters:

Receive: Transmit:

Octets 486 Octets 482

Packets 6 Packets 6

Discards 0 Discards 0

TooFewBuffers 0 Aborts 0

NonOctetAlignedFrames 0 DescriptorAreaFilleds 0

FIFOOverruns 0 FIFOUnderruns 0

FrameTooLongs 0 QueueLength 0

FrameTooShorts 0

CRCErrors 0

QueueLength 0

General counters:

Resets 1

---------------------------------------------------------------------------

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 47 48

Keine Kommentare

Allied Telesis AR450S Bedienungsanleitung Seite 37