Allied Telesis AR450S Bedienungsanleitung PDF herunterladen (Seite 25)

Switching on the AR440S, AR441S and AR450S DISABLE SWITCH DEBUG 3-25

Software Release 2.6.6

C613-03079-00 REV A

cannot be destroyed if ports still belong to it, or if other modules are attached

to it.

Examples To destroy the VLAN with the VID of 1234, use the command:

DESTROY VLAN=1234

To remove all user created VLANs from the router, none of which have any

member ports, use the command:

DESTROY VLAN=ALL

Related Commands CREATE VLAN

SHOW VLAN

DISABLE SWITCH AGEINGTIMER

Syntax DISABLE SWITCH AGEINGTIMER

Description This command disables the ageing timer from ageing out dynamically learned

entries in the Forwarding Database. The default setting for the ageing timer is

enabled.

Example To disable the ageing out of learned MAC addresses, use the command:

DISABLE SWITCH AGEINGTIMER

Related Commands ENABLE SWITCH AGEINGTIMER

SHOW SWITCH

DISABLE SWITCH DEBUG

Syntax DISABLE SWITCH DEBUG={ARL|DMA|M6|PHY|ALL}

Description This command disables the specified switch debug mode or all switch

debugging. The DEBUG parameter specifies the switch debug mode to be

disabled (see Table 1-17 on page 1-53).

Table 3-8: Switch debugging options.

Debug Options Description

ARL Operations related to the Forwarding Database.

DMA Operations related to Direct Memory Access requests.

M6 Operations related to the switch chip.

PHY Operations related to the PHY port interfaces.

ALL All debug options

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 47 48

Keine Kommentare

Allied Telesis AR450S Bedienungsanleitung Seite 25