Allied-telesis AT-S39 Bedienungsanleitung PDF herunterladen (Seite 51)

AT-S39 User’s Guide

The window displays the current status of the switch at the end of

selection “1 - Switch State.” For example, the switch’s current

status in the figure above is Master.

Note

The “2 - Stacking Services” selection in the window is available only

on master switches.

2. To change a switch’s stacking status, type 1 to select Switch State.

The following prompt is displayed.

Enter new setup (M/S/U) ->

3. Type M to change the switch to a master switch, S to make it a slave

switch, or U to make the switch unavailable. Press Return.

4. Type S to select Save Configuration Changes.

A change to the status is immediately activated on the switch.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 241 242

Keine Kommentare

Allied-telesis AT-S39 Bedienungsanleitung Seite 51