Allied-telesis AT-S39 Bedienungsanleitung PDF herunterladen (Seite 180)

Section III: Web Browser Management

180

Gateway address

This parameter specifies the default router’s IP address. This

address is required if you intend to remotely manage the switch

from a management station that is separated from the switch by

a router.

4. After you have set the parameters, click Apply. Your changes are not

stored by the switch until you select Apply.

5. If you made a change to the IP address, subnet mask, or gateway

address, you must reset the switch to activate your change. You

cannot reset a switch from a web browser management session. You

can reset a switch from a local or a Telnet session, or by using the

Reset button on the switch.

1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 241 242

Keine Kommentare

Allied-telesis AT-S39 Bedienungsanleitung Seite 180