Allied-telesis AT-S39 Bedienungsanleitung PDF herunterladen (Seite 132)

Section II: Local and Telnet Management

132

The port numbering scheme is from right to left. As an example,

assume that ports 1 through 4 on the switch were members of the

same multicast group. This would be represented in the column

as follows: “0000000F”. Another example is “000020F. This

example would indicate that ports 1 to 4 and port 10 on the switch

were members of the same multicast group.

CPU

Indicates whether the traffic received on the port is sent to the

switch’s CPU. Yes indicates that the traffic is being sent to the CPU

while No indicates it is not.

MIR

Indicates whether the traffic on the port is being mirrored. Yes

means the traffic is being mirrored while No indicates that it is not.

EMP

Indicates whether multicast packets are being forwarded by ports

in the blocking state. This feature is not supported at this time.

This column will indicate “No” for all multicast addresses, except

for the switch’s MAC address. Multicast packets are forwarded

only by ports in the forwarding state.

VLANID

The VID of the VLAN to which the port is an untagged member.

Type

The MAC address type. The type can be either static or dynamic.

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 241 242

Keine Kommentare

Allied-telesis AT-S39 Bedienungsanleitung Seite 132