Allied-telesis AT-S39 Bedienungsanleitung Seite 25

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 242
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 24
AT-S39 Users Guide
25
Starting a Local
Management
Session
To start a local management session, perform the following procedure:
1. Connect one end of a straight-through RS232 cable with a DB-9
connector to the RS232 Terminal Port on the switch.
Figure 1 Connecting a Terminal or PC to the RS232 Terminal Port
2. Connect the other end of the cable to an RS-232 port on a terminal or
PC with a terminal emulator program.
3. Configure the terminal or terminal emulator program as follows:
Baud rate: 1200 bps to 115200 bps (default 9600; see Note below)
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
DE
LINK
MODE
PORT B
FAULT
MASTER
PWR
RS-232 TERMINAL PORT
Seitenansicht 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 241 242

Kommentare zu diesen Handbüchern

Keine Kommentare