Allied-telesis AT-S39 Bedienungsanleitung PDF herunterladen (Seite 181)

AT-S39 User’s Guide

181

Activating the BOOTP and DHCP Services

For background information on BOOTP and DHCP, refer to the section

Activating the BOOTP and DHCP Services on page 37.

To activate or deactivate the BOOTP and DHCP protocols on the switch

from a web browser management session, perform the following

procedure:

1. From the Home Page, select Configuration.

The Configuration window is displayed with the System option

selected by default.

2. If the System option is not selected, select it and then select the

General tab.

The General Tab window is displayed, as shown in Figure 54 on

page 178.

3. In the BOOTP/DHCP options in the General tab window, click either

Enable or Disable.

4. Reset the switch. You cannot reset a switch from a web browser

management session. You can reset a switch from a local or a Telnet

session, or by using the Reset button on the switch.

1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 241 242

Keine Kommentare

Allied-telesis AT-S39 Bedienungsanleitung Seite 181