Allied-telesis AT-S39 Bedienungsanleitung PDF herunterladen (Seite 218)

Section III: Web Browser Management

218

Setting the Switch’s VLAN Mode

This section contains the procedure for setting a switch’s VLAN mode.

You can configure a switch to support port-based and tagged VLANs or

to operate in the Basic VLAN mode.

Note

Refer to Chapter 10, Virtual LANs, for descriptions of port-based

and tagged VLANs and the Basic VLAN mode.

To set the switch’s VLAN mode, perform the following procedure:

1. From the Home Page, select Configuration.

2. From the Configuration menu, choose System.

3. Select the General tab.

4. In the Switch Mode section of the window, click either Tagged or

Basic.

If you select Tagged, which is the default, the switch will support

both port-based VLANs and tagged VLANs. If you select Basic, the

switch will operate in the Basic VLAN mode.

5. Reset the switch. You cannot reset the switch from a web browser

management session. You can reset the unit through a local or Telnet

session or with the reset button on the back panel of the device.

1 2 ... 213 214 215 216 217 218 219 220 221 222 223 ... 241 242

Keine Kommentare

Allied-telesis AT-S39 Bedienungsanleitung Seite 218