Allied-telesis AT-S95 CLI Bedienungsanleitung PDF herunterladen (Seite 283)

100

101

System Management Commands

Page 271

Command Mode

User EXEC mode

User Guidelines

There are no user guidelines for this command.

Example

The following example lists open Telnet sessions.

The following table describes significant fields shown above.

show system

The show system User EXEC mode command displays system information.

Syntax

show system [unit unit]

Parameters

•

unit— Specifies the number of the unit. (Range: 1-6)

Default Configuration

This command has no default configuration.

Command Mode

User EXEC mode

User Guidelines

There are no user guidelines for this command.

Console>

show sessions

Connection Host Address Port Byte

---------- ------------- ---------- ----- ----

1 Remote device 172.16.1.1 23 89

2 172.16.1.2 172.16.1.2 23 8

Field Description

Connection Connection number.

Host Remote host to which the device is connected through a Telnet session.

Address IP address of the remote host.

Port Telnet TCP port number

Byte Number of unread bytes for the user to see on the connection.

1 2 ... 278 279 280 281 282 283 284 285 286 287 288 ... 347 348

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AT-S95 CLI Bedienungsanleitung Seite 283

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AT-S95 CLI