Allied-telesis AT-S95 CLI Bedienungsanleitung PDF herunterladen (Seite 236)

Page 224

Not approved by Document Control. For review only.

Allied Telesis

Command Line Interface User’s Guide

abort (mst)

The abort MST Configuration mode command exits the MST configuration mode without applying the

configuration changes.

Syntax

abort

Default Configuration

This command has no default configuration.

Command Mode

MST Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example exits the MST configuration mode without saving changes.

show spanning-tree

The show spanning-tree Privileged EXEC mode command shows spanning tree configuration.

Syntax

show spanning-tree [ethernet interface -number| port-channel port-channel-number] [instance instance-id]

show spanning-tree [detail] [active | blockedports] [instance instance-id]

show spanning-tree mst-configuration

Parameters

•

detail —Display detailed information.

• active — Display active ports only.

• blockedports — Display blocked ports only.

• mst-configuration — Display the MST configuration identifier.

• interface-number — Ethernet port number.

• port-channel-number — Port channel index.

• instance-id — ID associated with a spanning-tree instance.

Default Configuration

This command has no default configuration.

Console(config) # spanning-tree mst configuration

Console(config-mst) # abort

1 2 ... 231 232 233 234 235 236 237 238 239 240 241 ... 347 348

Keine Kommentare

Allied-telesis AT-S95 CLI Bedienungsanleitung Seite 236