Allied-telesis AT-S95 CLI Bedienungsanleitung PDF herunterladen (Seite 233)

Spanning-Tree Commands

Page 221

Syntax

instance instance-id {add | remove} vlan vlan-range

Parameters

•

instance-ID—ID of the MST instance (Range: 1-15).

• vlan-range—VLANs to be added to or removed from the specified MST instance. To specify a range of

VLANs, use a hyphen. To specify a series of VLANs, use a comma. (Range: 1-4094).

Default Configuration

VLANs are mapped to the common and internal spanning tree (CIST) instance (instance 0).

Command Modes

MST Configuration mode

User Guidelines

All VLANs that are not explicitly mapped to an MST instance are mapped to the common and internal spanning

tree (CIST) instance (instance 0) and cannot be unmapped from the CIST.

For two or more devices to be in the same MST region, they must have the same VLAN mapping, the same

configuration revision number, and the same name.

Example

The following example maps VLANs 10-20 to MST instance 1.

name (mst)

The name MST Configuration mode command defines the configuration name. Use the no form of this command

to return to the default setting.

Syntax

name string

no name

Parameters

•

string—MST configuration name. Case-sensitive (Range: 1-32 characters).

Default Configuration

The default name is a bridge ID.

Command Mode

MST Configuration mode

Console(config)# spanning-tree mst configuration

Console(config-mst)# instance 1 add vlan 10-20

1 2 ... 228 229 230 231 232 233 234 235 236 237 238 ... 347 348

Keine Kommentare

Allied-telesis AT-S95 CLI Bedienungsanleitung Seite 233