Allied-telesis AT-S95 CLI Bedienungsanleitung PDF herunterladen (Seite 279)

100

101

System Management Commands

Page 267

Example

The following example reloads Unit 2 of the stack.

stack change unit-id

Note

This command is operational in the AT-S94/24, AT-S94/24POE, AT-S94/48 and AT-S94/48POE devices.

The stack change unit-id Global Configuration mode command is used to change the Unit ID of a specific unit.

Syntax

stack change unit-id unit-number to new-unit-number

Parameters

•

unit-number— Specifies the current number of the unit. (Range: 1-6)

• new-unit-number— Specifies the new number of the unit. (Range: 1-6)

Default Configuration

The automatically configured unit number is assigned.

Command Modes

Global Configuration mode

User Guidelines

This command is not relevant to standalone devices.

The command takes effect only after resetting the device.

Example

This example changes Unit Number 6 to Unit Number 5. The command takes effect only after resetting the device.

show stack

Note

This command is operational in the AT-S94/24, AT-S94/24POE, AT-S94/48 and AT-S94/48POE devices.

The show stack User EXEC mode command displays information about the status of a stack.

Console(config)#

stack reload

unit

Console#

config

Console(config)#

stack change unit-id

1 2 ... 274 275 276 277 278 279 280 281 282 283 284 ... 347 348

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AT-S95 CLI Bedienungsanleitung Seite 279

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AT-S95 CLI