Allied-telesis AT-S95 CLI Bedienungsanleitung PDF herunterladen (Seite 137)

100

101

IP Addressing Commands

Page 125

Syntax

ip domain-lookup

no ip domain-lookup

Default Configuration

The default configuration is set to enabled.

Command Mode

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example enables IP Domain Naming System (DNS)-based host name-to-address translation.

ip domain-name

The ip domain-name Global Configuration mode command defines a default domain name used by the software

to complete unqualified host names (names without a dotted-decimal domain name). Use the no form of this

command to remove the default domain name.

Syntax

ip domain-name name

no ip domain-name

Parameters

•

name — Specifies the default domain name used to complete unqualified host names. Do not include the

initial period that separates an unqualified name from the domain name. (Range: 1-158 characters)

Default Configuration

A default domain name is not defined.

Command Mode

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example defines default domain name www.website.com.

Console(config)# ip domain-lookup

Console(config)#

ip domain-name

www.website.com

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 347 348

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AT-S95 CLI Bedienungsanleitung Seite 137

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AT-S95 CLI