Allied-telesis AT-S63 Bedienungsanleitung PDF herunterladen (Seite 27)

AT-S63 Management Software Web Browser User’s Guide

Section I: Basic Operations 27

Note

This procedure describes the System Name, Administrator, and

Comments parameters in the Administration section of the tab. The

parameters in the IP Configuration section are described in

“Displaying the IP Address of the Local Interface” on page 37. The

Passwords section is described in “Changing the Manager and

Operator Passwords” on page 28. The Reset button at the bottom of

the tab resets the switch and is explained in “Rebooting a Switch” on

page 33.

2. Configure the following parameters as necessary:

System Name

This parameter specifies a name for the switch (for example, Sales

Ethernet switch). The name is displayed at the top of the AT-S63

management pages and tabs. The name can be from 1 to 39

characters. The name can include spaces and special characters,

such as exclamation points and asterisks. The default is no name. This

parameter is optional.

Administrator

This parameter specifies the name of the network administrator

responsible for managing the switch. The name can be from 1 to 20

characters. It can include spaces and special characters, such as

dashes and asterisks. The default is no name. This parameter is

optional.

Comments

This parameter specifies the location of the switch, (for example, 4th

Floor - rm 402B). The location can be from 1 to 20 characters. The

location can include spaces and special characters, such as dashes

and asterisks. The default is no location. This parameter is optional.

3. Click Apply to activate your changes on the switch.

4. To permanently save your changes, select the Save Config option in

the Configuration menu.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 411 412

Keine Kommentare

Allied-telesis AT-S63 Bedienungsanleitung Seite 27