Allied-telesis AT-S63 Bedienungsanleitung PDF herunterladen (Seite 250)

100

101

Chapter 17: SNMPv3

250 Section III: SNMPv3

Note

Enter a value for the Message Processing Model field only if you

select SNMPv1 or SNMPv2c as the Security Model. If you select the

SNMPv3 protocol as the Security Model, then the switch

automatically assigns the Message Processing Model to SNMPv3.

5. In the Message Processing Model field, enter a Security Model that is

used to process messages.

Select one of the following SNMP protocols:

Select this value to process messages with the SNMPv1 protocol.

v2c

Select this value to process messages with the SNMPv2c protocol.

Select this value to process messages with the SNMPv3 protocol.

6. In the Security Model field, select one of the following SNMP protocols

as the Security Model for this Security Name, or User Name.

Select this value to associate the Security Name, or User Name, with

the SNMPv1 protocol.

v2c

Select this value to associate the Security Name, or User Name, with

the SNMPv2c protocol.

Select this value to associate the Security Name, or User Name, with

the SNMPv3 protocol.

7. In the Security Name field, enter a User Name that you previously

configured with the SNMPv3 User Table.

See “Creating a User Table Entry” on page 206.

8. In the Security Level field, select one of the following Security Levels:

Note

The value you configure for the Security Level must match the value

configured for the User Name in the SNMPv3 User Table Menu. See

“Creating a User Table Entry” on page 206.

No Authentication/Privacy

This option represents neither an authentication nor privacy protocol.

1 2 ... 245 246 247 248 249 250 251 252 253 254 255 ... 411 412

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AT-S63 Bedienungsanleitung Seite 250

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AT-S63