Allied-telesis AT-S63 Bedienungsanleitung PDF herunterladen (Seite 240)

Chapter 17: SNMPv3

240 Section III: SNMPv3

You can enter a name of up to 32 alphanumeric characters.

6. In the IP Address field, enter the IP address of the host.

Use the following format for an IP address:

XXX.XXX.XXX.XXX

7. In the UDP Port Number field, enter a UDP port number.

You can enter a UDP port in the range of 0 to 65,535. The default UDP

port is 162.

8. In the Timeout field, enter a timeout value in milliseconds.

When an Inform message is generated, it requires a response from the

switch. The timeout value determines how long the switch considers

the Inform message an active message. This parameter applies to

Inform messages only. The range is from 0 to 2,147,483,647

milliseconds. The default value is 1500 milliseconds.

9. In the Retries field, enter the number of times the switch retries, or

resends, an Inform message.

When an Inform message is generated, it requires a response from the

switch. This parameter determines how many times the switch

resends an Inform message. The Retries parameter applies to Inform

messages only. The range is 0 to 255 retries. The default is 3 retries.

10. In the Tag List field, enter a list of tags that you configured in a

SNMPv3 Notify Table with the Notify Tag parameter.

See “Creating a Notify Table Entry” on page 233. Enter a Tag List of

up to 256 alphanumeric characters. Use a space to separate entries,

for example:

hwengtag swengtag testengtag

11. In the Target Parameters field, enter a Target Parameters name.

This name can consist of up to 32 alphanumeric characters. The value

configured here must match the value configured with the Target

Parameters Name parameter in the SNMPv3 Target Parameters

Table.

12. In the Storage Type field, enter one of the following storage types for

this table entry:

Volatile

Select this storage type if you do not want the ability to save an entry in

the Target Address Table. After making changes to a Target Address

Table entry with a Volatile storage type, the Save Config option is not

displayed on the Configuration menu.

1 2 ... 235 236 237 238 239 240 241 242 243 244 245 ... 411 412

Keine Kommentare

Allied-telesis AT-S63 Bedienungsanleitung Seite 240