Allied Telesis AT-iMG606BD Spezifikationen PDF herunterladen (Seite 657)

100

101

14. Provisioning the iMG/RG Creating RG Profiles with Field Descriptions

648

AlliedView NMS Administration Guide

iMG/RG Bootstrap VLAN Id The default VLAN on the RG that is used when sending the original Discover

Message. This is “out of the box” (factory configuration). This is used only through

bootstrap 1 usually

Persist Checkbox Used to retain the bootstrap VLAN at the end of triple play provisioning to aid in the

replacement of faulty CPE. It can also put the bootstrap VLAN on the port when the

profile (with Persist checked) is applied to the port from the View/Modify screen or

deployed from the deploy profile tool.

iMG/RG Mgmt VLAN Id The VLAN used for subsequent downloads once communication is established with

the AlliedView NMS. It is derived from the im.conf file.

Include Service VLANs in

Profile

Controls which network model is to be used.

True - Access Island model is being used, and service VLAN fields are activated.

False - Open Access model is being used, and service VLAN fields are de-activated.

Internet VLAN The VLAN used for internet type service

Video VLAN The VLAN used for video type service

Voice VLAN The VLAN used for voice type service

CES VLAN The VLAN used for CES type service

iMG/RG Additional VLAN

IDs

Shows VLAN IDs for custom VLANs. Use the Add/Remove button to open the

Additional VLANs panel. Note that port service must be set to “None” to add an

additional VLAN to the iMG. Refer to 14.8.8.

System Power Management Enabled or disabled. Refer to 14.14.

Loop Detection Loop detection is intended to detect layer-2 loops in subscriber networks. When

enabled, loop detection will disable the port where the symptom is detected before

the loop does damage to the service provider's network.

Loop detection is available on all switch interfaces on iMGs running software release

4.3 and above. On iMGs running software release 2.x or 3.x, loop detection is

supported on 10M half-duplex links and is intended to support Ethernet links that

have baluns connected.

SNTP Server The IP address for the SNTP server, used to derive the correct time and time

settings. (Default is None.)

Daylight Saving Enables or Disables the Daylight Savings Feature for the iMG/RG. Note that this is

only for 3-7 devices. This is also available on the Services Management Window.

Time Zone Time Zone for the iMG, for example EST for Eastern Standard Time.

Note: For TR-069 CPEs, this is determined by the SNTP server setting, and so

SNTP Server must be filled in first. If no SNTP server is provisioned, the

iMGs default to “clock.fmt.he.net”.

Limited User Login User ID of user with limited capabilities

New Limited User Password Password for the Limited User

New Manager Password Password for the user that the AlliedView NMS uses when it provisions the device.

The userID is part of AlliedView NMS, has super user privileges, and cannot be

changed.

Super User Login The super user that can be created and changed by the administrator.

New Super User Password The password for the Super User.

Split Management A subscriber (rather than an NMS administrator) can configure wireless parameters

on wireless iMG devices. Refer to 14.8.6.

TABLE 14-5 Create RG General Port Profile Form - Mgmt InfoTab (Continued)

Attribute Value

1 2 ... 652 653 654 655 656 657 658 659 660 661 662 ... 994 995

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied Telesis AT-iMG606BD Spezifikationen Seite 657

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gateways / Controller Allied Telesis AT-iMG606BD