Allied Telesis AT-iMG606BD Spezifikationen PDF herunterladen (Seite 132)

100

101

6. Profile Management Coordination of External and NMS Profiles

123

AlliedView NMS Administration Guide

Note: When a profile is out of sync with what has been defined on the device, a “*” is next to the profile name in the Profile column

of the Port or Device table.

6.12 Coordination of External and NMS Profiles

As described above, the AlliedView NMS profiles operate at the network service level; a profile is created for a card type or

port type, and can then be applied to multiple interfaces over multiple devices. Moreover, the profiles include a more global

set of attributes, such as traffic and performance management attributes. Finally, the profiles are filled out using pull-down

menus and GUIs, ensuring there is less chance of error.

When the NMS sets the port attributes by deploying an NMS profile, the

SHOW INTERFACE command on the iMAP displays

the NMS profile name that has been applied as an External Profile name. Moreover, if at the NMS a port is deprovisioned, the

iMAP output for External Profile is set to None.

At the NMS, when an iMAP port is displayed, the current value of the External Profile name will be displayed at or near the

bottom of the view-only attributes, labeled “Interface Profile Name”. Normally this name will match the Profile name

deployed by the NMS (displayed upper right). Refer to the following figure.

FIGURE 6-4 ADSL Details - NMS and Interface Profile

Whenever a profile is deployed by the NMS to the port, the Interface Profile Name will be set to the port Profile name.

Note that there is no other way to change the Interface Profile Name via the NMS. If for whatever reason the names do not

match, for example someone changes the external profile name on the device using the CLI, the port profile name (upper

right) will be marked with an asterisk. Normally this will only be detected during discovery, when the NMS automatically

performs port-profile comparison.

Note: The administrator must therefore be aware that if the External Profile Name is changed at the CLI, there will be no

notification of this at the NMS until the device is (re)discovered.

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 994 995

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied Telesis AT-iMG606BD Spezifikationen Seite 132

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gateways / Controller Allied Telesis AT-iMG606BD