Allied Telesis AT-iMG606BD Spezifikationen PDF herunterladen (Seite 322)

10. Card Management CES8 Card

AlliedView NMS Administration Guide

FIGURE 10-13 CES8 Card Details

All the fields for the General tab are the same as for other cards except for the following:

• Port Type - This can be DS1 (the default) or E1. Note that the card must be disabled before the Port Type can be

• Timing Ref. - The timing reference is where the card will get its clocking reference from. The choices are:

• INTERNAL - The internal oscillator (locked to a timing signal from the active CFC)

• A “self-timed” DS1/E1 port physical interface

• A “self-timed” Pseudo-span (using RTP-based derived, adaptive timing)

The buttons for the CES8 card are similar to other cards, while noting the following:

• Restart - Needed when a different load is being used.

• Run Diags. - Runs a set of diagnostics. The card must be disabled first. If there are failures, there are messages and logs

that can be accessed using the Log Manager.

Keine Kommentare

Allied Telesis AT-iMG606BD Spezifikationen Seite 322