Allied-telesis AT-S25 Bedienungsanleitung PDF herunterladen (Seite 69)

AT-S25 Management Software User’s Guide

Configuring Port Security

Note

Port security can only be set through a local management interface.

If you change port security mode through Telnet, a warning

message about the possible disconnection from a Telnet interface

will display.

To set a switch’s port security level, perform the following procedure:

1. From the Main Menu, type 1 to select Ports Menu.

2. From the Ports Menu, type 5 to select Port Security.

The Port Security menu in Figure 19 is displayed.

Figure 19 Port Security Menu

3. From the Port Security menu, type M if you wish to select a module

other than the one currently displayed.

The prompt message is displayed:

Select Module ID: [1 to 8] ->

4. Enter the ID of the module you wish to select, and press the Enter key.

5. From the Port Security menu, type 1 to select Port Security Mode:

Automatic.

The following prompt is displayed:

Enter new mode (A-Automatic, L-Limited, S-Secured,

K-locKed) :

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 276 277

Keine Kommentare

Allied-telesis AT-S25 Bedienungsanleitung Seite 69