Allied-telesis AT-S25 Bedienungsanleitung PDF herunterladen (Seite 61)

AT-S25 Management Software User’s Guide

3 - Negotiation

Configures a port for Auto-Negotiation or to manually

set a port’s speed and duplex mode.

Possible settings for this parameter are:

• Auto: Sets a port’s speed and duplex mode

automatically. (default)

• Manual: Set a port’s speed and duplex mode

manually.

If you select Auto, the switch will set both speed and

duplex mode for the port automatically.

If you select Manual, two additional selections are

displayed in the window:

4 - Duplex ..............Half

5 - Speed .............. 10MB

You use these two selections to set the port’s duplex

and speed mode.

Possible settings for these 2 selections are:

4 - Duplex:

• Full = Full-duplex

• Half = Half-duplex

5 - Speed:

• 0010 = 10MB

• 0100 = 100MB

• 1000 = 1000MB (AT-8324 uplink only)

F - Flow Control

Uses a special pause packet to stop the end node from

sending frames. The pause packet notifies the end node

to stop transmitting for a specified period of time.

Possible settings for this parameter are:

• Enable

• Disable (default)

NOTE: This parameter only applies to ports operating in

full-duplex mode.

PARAMETER DESCRIPTION

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 276 277

Keine Kommentare

Allied-telesis AT-S25 Bedienungsanleitung Seite 61