Allied-telesis AT-S62 Bedienungsanleitung PDF herunterladen (Seite 338)

100

101

Chapter 25: 802.1x Port-based Access Control Commands

338

between the client and the

authentication server. Each

client that attempts to

access the network is

uniquely identified by the

switch by using the client's

MAC address. This is the

default setting.

authorised Disables 802.1X port-based

forceauthenticate authentication and causes

the port to transition to the

authorized state without any

authentication exchange

required. The port transmits

and receives normal traffic

without 802.1X-based

authentication of the client.

The parameters are

equivalent.

unauthorised Causes the port to remain in

forceunauthenticate the unauthorized state,

ignoring all attempts by the

client to authenticate. The

switch cannot provide

authentication services to

the client through the

interface. The parameters

are equivalent.

quietperiod Sets the number of seconds that the switch remains in

the quiet state following a failed authentication

exchange with the client. The default value is 60

seconds. The range is 0 to 65,535 seconds.

txperiod Sets the number of seconds that the switch waits for a

response to an EAP-request/identity frame from the

client before retransmitting the request. The default

value is 30 seconds. The range is 1 to 65,535 seconds.

reauthperiod Enables periodic reauthentication of the client, which

is disabled by default. The default value is 3600

seconds. The range is 1 to 65,535 seconds.

1 2 ... 333 334 335 336 337 338 339 340 341 342 343 ... 419 420

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AT-S62 Bedienungsanleitung Seite 338

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AT-S62