Allied-telesis AT-S62 Bedienungsanleitung PDF herunterladen (Seite 267)

100

101

AT-S62 Command Line User’s Guide

267

forcestpcompatible The bridge uses the RSTP

parameter settings, but

transmits only STP BPDU

packets from the ports. This

option is equivalent to the

STPCOMPATIBLE option.

normalrspt The bridge uses RSTP. It

transmits RSTP BPDU

packets, except on ports

connected to bridges

running STP. This is the

default setting.

Description

This command configures the following RSTP parameter settings.

❑ Bridge priority

❑ Hello time

❑ Forwarding delay

❑ Maximum age time

❑ Port priority

❑ Force version of STP or normal RSTP

This command can also return the RSTP parameters to their default

settings.

Note

You can use this command only if RSTP is the active spanning tree

protocol on the switch. See ACTIVATE RSTP on page 261.

Examples

The following command sets the bridge priority to 20480 (increment 5),

the hello time to 5 seconds, and the forwarding delay to 20 seconds:

set rstp priority=5 hellotime=5 forwarddelay=20

The following command uses the FORCEVERSION parameter to

configure the bridge to use the RSTP parameters but to transmit only

STP BPDU packets:

set rstp forceversion=stpcompatible

1 2 ... 262 263 264 265 266 267 268 269 270 271 272 ... 419 420

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AT-S62 Bedienungsanleitung Seite 267

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AT-S62