Allied-telesis AT-8202 Bedienungsanleitung PDF herunterladen (Seite 53)

AT-8202 ATM Uplink User’s Guide

2-25

ATM/SHOW/CONNECTION Example

This command displays a summary of all open ATM virtual channel

connections. A sample display of

ATM/SHOW/CONNECTION is

shown below, and parameters are described in Table 2-11.

Table 2-10 ATM/SHOW/CIP <CIP Index> Parameters

Parameter Description

CIP Index Index of this CIP entity

CIP Name A default name for this entity

Description Optional text description of up to 31 characters

IP Address Takes the same IP network number and subnet number of the LIS (logical

IP subnetwork)

IP Subnet Mask Subnet mask for this LIS entity

Admin Status Administrative status

Options: Enable or disable

Connection Type Connection type

Options: PVC or SVC

Server ATM Address If the connection type is SVC, the ATM address of the ARP server

Mtu Size Maximum transfer unit size for data transfer for this entity

Default: 9180, as deﬁned in RFC 1577

RIP Mode Routing internet protocol mode for this CIP entity

Default: Silent

Protocol State Operational state of the CIP

Active indicates that the connection to ARP server is up (only displayed if

administrative status is enabled and connection type is PVC)

Options: Active, inactive, connect request sent, unknown

ARP Server VCC VCI value of the connection to ARP server (only displayed if administrative

status is enabled and connection type is PVC)

Data VCC Connections Shows the list of VCI values of the data connections to destinations, if any

(only displayed if administrative status is enabled, connection type is PVC,

and there are data connections to other CIP entities)

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 79 80

Keine Kommentare

Allied-telesis AT-8202 Bedienungsanleitung Seite 53