Allied-telesis AT-8202 Bedienungsanleitung PDF herunterladen (Seite 25)

AT-8202 ATM Uplink User’s Guide

1-17

To create trunking service:

Note

Values shown are for example purposes only; replace with values that

apply to your own configuration.

1. Verify the existence of the VLANs you wish to configure with

trunking by using the

VLAN/SHOW/VLAN command.

2. Create the trunking service using the ATM/CONFIG/CREATE/

TRUNK

command. Valid trunk index values range from 0 through

15.

/VLAN/SHOW >VLAN

Virtual LAN Information:

VLAN VLAN IP Network Admin Operation Port

ID Description Address Status Status Membership

==== =============== ========== ======= ======= ==========

1 Default VLAN(#1 192.48.127.31 ENABLE ACTIVE 1-8

2 VLAN 2 1.1.1.1 ENABLE ACTIVE 9-16

/ATM/CONFIG/CREATE >trunk 1

TRUNK Configuration

1. TRUNK Index: 1

2. Description (Optional): TRUNK Instance 1

3. Admin Status (ENABLE(a), DISABLE(b)): ENABLED

4. Connection Type (PVC(a), SVC(b)): PVC

5. VCI Value (Reqd if PVC):

6. Destination ATM Address (Reqd if SVC):

Enter Selection, 0 to save the Modification or 'q' to Quit:

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 79 80

Keine Kommentare

Allied-telesis AT-8202 Bedienungsanleitung Seite 25