Allied-telesis AT-8202 Bedienungsanleitung PDF herunterladen (Seite 37)

AT-8202 ATM Uplink User’s Guide

2-9

To associate a CIP entity with an SVC:

1. Enter option 6b for an SVC connection type.

6=b

2. Enter

7=<ARP server’s ATM address>

This entry must be in 20-octet hex format, and this parameter

is mandatory for a CIP entity over SVC.

Note

Any connections for the CIP over SVC are possible only after the

FORMULA 8200 switch has completed the ATM address registration

with the ATM switch.

To associate a CIP entity with a PVC:

1. Enter option 6a for PVC connection type.

6=a

2. Enter option 7a to add a value to the VCI list.

7=a

The system prompts you for a VCI value:

3. Enter a unique VCI value, i.e., it does not correspond to an existing

connection.

Arp Server ATM Address The ATM address of the ARP server; not used for PVC connections

but mandatory if the connection type is SVC

Mtu Size Maximum transfer unit size for data transfer for this entity

Default is 9180 as deﬁned in RFC 1577.

IP RIP Mode Routing information protocol mode for this CIP entity

Options: Active, Silent, Deaf, Inactive

Table 2-2 ATM/CONFIG/CREATE/CIP Parameters (Continued)

Parameter Description

Enter VCI value to be added to the VCI list:

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 79 80

Keine Kommentare

Allied-telesis AT-8202 Bedienungsanleitung Seite 37