Allied Telesis AR450S Betriebsanweisung PDF herunterladen (Seite 84)

84 AR400 Series Router User Guide

Software Release 2.5.2

C613-02034-00 REV A

Before You Start

1. Ensure that the routers you want to configure are connected as described in

the Quick Install Guide.

2. Connect a terminal to the console port (port 0) on each router as described

in the in the Quick Install Guide. Alternatively, you can connect a PC to the

console port and use a terminal emulation program like Windows™

Terminal.

3. Login to the MANAGER account on each router (see “Logging In” on

page 15).

Configuring IP

This example (Figure 8 on page 84) illustrates the steps required to configure

TCP/IP using the router’s command line interface. Two routers running TCP/

IP will be connected together using the Point-to-Point Protocol (PPP) over a

wide area link. Each router is associated with a VLAN.

Figure 8: Example configuration for an IP network.

172.16.254.1

172.16.254.2

192.168.31.16

172.16.8.0

192.168.31.30

172.16.8.33

PPP Data Link

UGIP1_R

Head Office Router Remote Office Router

Table 10: Example configuration parameters for an IP network .

Parameter Head Office Router Remote Office Router

VLAN interface vlan2 vlan3

Ports (untagged) Ports 2-4 Ports 1-3

VLAN interface IP address 172.16.8.33 192.168.31.30

VLAN IP subnet address 172.16.8.0 192.168.31.16

Ethernet LAN IP subnet mask 255.255.255.0 255.255.255.240

PPP interface ppp0 ppp0

PPP interface IP address 172.16.254.1 172.16.254.2

PPP interface IP subnet address 172.16.254.0 172.16.254.1

PPP interface IP subnet mask 255.255.255.0 255.255.255.0

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 118 119

Keine Kommentare

Allied Telesis AR450S Betriebsanweisung Seite 84