Allied Telesis AR450S Betriebsanweisung PDF herunterladen (Seite 50)

50 AR400 Series Router User Guide

Software Release 2.5.2

C613-02034-00 REV A

To load a patch file

1. Configure the LOADER.

Set the LOADER module with defaults to make the process of

downloading files in future simpler.

SET LOADER METHOD=HTTP SERVER=192.168.1.1

DESTINATION=FLASH

2. Download the patch file.

Download the patch file onto the router, using the defaults set above.

LOAD FILE=52232-01.paz

When the download has completed, check that the file is in FLASH.

SHOW FILE

This shows the file 52232-01.paz is present.

To activate the patch see “To upgrade to a new patch file:” on page 54.

Uploading Files From the Router

The LOADER can upload files from the router to a network host, using TFTP or

ZMODEM. Upload files using one of the commands:

UPLOAD [METHOD=TFTP] [FILE=filename]

[SERVER={hostname|ipadd}]

UPLOAD [METHOD=ZMODEM] [FILE=filename] [ASYN=port]

The UPLOAD command uses defaults set with the SET LOADER command,

for parameters not specified with the upload command.

You can install Allied Telesyn’s Trivial File Transfer Protocol Server (AT-TFTPD

on any PC or server running Windows. This will provide a simple way to make

files available to all Allied Telesyn routers and layer 3 switches in your

network. The TFTP Server, and a readme file describing how to install and use

it, are provided on the AR400 Series Router Documentation and Tools CD-ROM.

Example: Upload a Configuration File Using TFTP

This example uploads a configuration file from the router to a TFTP server on

the network. Before following this procedure, make sure:

■ The TFTP server is operating on a host with an IP address (for example

192.168.1.3) on the network.

■ The router has a valid IP address (for example 192.168.1.2) on the interface

connecting it to the TFTP server, and that it can communicate with the

server.

■ The configuration file is present in the router’s FLASH.

To upload a log file:

1. Configure the LOADER.

Set the LOADER module with defaults to make the process of

downloading and uploading files in future simpler.

SET LOADER METHOD=TFTP SERVER=192.168.1.3

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 118 119

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied Telesis AR450S Betriebsanweisung Seite 50

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Allied Telesis AR450S