Allied Telesis AR450S Betriebsanweisung PDF herunterladen (Seite 105)

Routing 105

Software Release 2.5.2

C613-02034-00 REV A

Figure 16: .A basic OSPF network with an addressless PPP link.

To configure a basic OSPF network follow these steps

The following steps are required:

1. Configure the PPP and Ethernet interfaces on router 1.

2. Configure router 1 as an OSPF router.

3. Configure the PPP and Ethernet interfaces on router 2.

4. Configure router 2 as an OSPF router.

1. Configure the PPP and Ethernet interfaces on router 1.

To create IP interfaces to use the PPP and Ethernet interfaces, and assign an

OSPF metric to each IP interface, enter the command:

CREATE PPP=0 OVER=SYN0

ENABLE IP

ADD IP INTERFACE=PPP0 IP=172.31.2.1 MASK=255.255.255.0

OSPFMETRIC=1

ADD IP INTERFACE=ETH0 IP=172.31.1.1 MASK=255.255.255.0

OSPFMETRIC=1

2. Configure router 1 as an OSPF router.

To create an OSPF area, assign the IP interfaces to the area, and configure

OSPF routing parameters, enter the command:

ENABLE OSPF

ADD OSPF AREA=0.0.0.1 AUTHENTICATION=PASSWORD

ADD OSPF RANGE=172.31.0.0 AREA=0.0.0.1 MASK=255.255.0.0

ADD OSPF INTERFACE=ETH0 AREA=0.0.0.1 PASSWORD=asecret

ADD OSPF INTERFACE=PPP0 AREA=0.0.0.1 PASSWORD=bsecret

3. Configure the PPP and Ethernet interfaces on router 2.

To create IP interfaces to use the PPP and Ethernet interfaces, and assign an

OSPF metric to each IP interface, enter the command:

CREATE PPP=0 OVER=SYN0

ENABLE IP

ADD IP INTERFACE=PPP0 IP=172.31.2.2 MASK=255.255.255.0

OSPFMETRIC=1

ADD IP INTERFACE=ETH0 IP=172.31.108.10 MASK=255.255.255.0

OSPFMETRIC=1

UGOSPF1_R

LAN

Point-to-Point link

172.31.2.1

172.31.2.2

172.31.108.10

Router 2

Router 1

172.31.1.1

Area 1

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 118 119

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied Telesis AR450S Betriebsanweisung Seite 105

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Allied Telesis AR450S