Allied Telesis Rapier 16Fi-FX Installationsanleitung PDF herunterladen (Seite 229)

14 disable lldp portdescription Software Reference

disable lldp portdescription

Syntax DISable LLDP PORTDescription [POrt={ALL|port-list}]

Description This command stops the switch from advertising the port description TLV on

the specified ports. This is the IEEE 802 LAN station's port description that is

associated with the local system. The LLDP agent now sends LLDPDUs

without port description information.

Use the port parameter to specify the ports for which to disable port

description TLV advertisement, either a list of ports or all ports. port-list can be

any/all of the following:

■ a single switch port number. Port numbers start at 1 and end at m, where m

is the highest numbered port.

■ a range of switch port numbers (specified as n-m).

■ a comma-separated list of switch port numbers and/or ranges.

■ a single Ethernet interface (specified as ethn).

■ a comma-separated list of Ethernet interfaces. Ethernet port numbers start

at eth0 and end at ethn, where n is the highest numbered Ethernet port.

■ the Ethernet interface eth0.

By default, LLDP port description advertisement is enabled for all ports.

Examples To stop the switch from advertising the port description on port 1 and 2, use

the command:

dis lldp portd po=1,2

To stop the switch from advertising the port description on all ports, use one of

the commands:

dis lldp portd

dis lldp portd po=all

Keine Kommentare

Allied Telesis Rapier 16Fi-FX Installationsanleitung Seite 229