Allied Telesis Rapier 16Fi-FX Installationsanleitung Seite 178
- Seite / 283
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
84 show igmp filter Software Reference
show igmp filter
Syntax SHow IGMP FILter[=filter-id]
where filter-id is a decimal number in the range 1 to 99
Description This command displays information about an IGMP filter or all IGMP filters
(Figure 4, Table 1). If a filter is specified, only information about that filter is
displayed.
Figure 4: Example output from the show igmp filter command
Examples To display information about IGMP filter 3, use the command:
sh igmp fil=3
IGMP Filters
-------------------------------------------------------------------------------
No. Entry Group Address Range Msg Type Action Matches
-------------------------------------------------------------------------------
1 224 224.1.2.3 - 224.1.2.3 Report Exclude 10
229 229.1.1.1 - 229.2.2.2 Leave Include 2
Reports - Recd: 80 Passed: 70 Dropped: 10
Queries - Recd: 0 Passed: 0 Dropped: 0
Leaves - Recd: 2 Passed: 2 Dropped: 0
-------------------------------------------------------------------------------
Table 1: Parameters in the output of the show igmp filter command
Parameter Meaning
No. The filter number.
Entry The entry number of an entry in this filter.
Group Address Range The multicast group address range for this entry.
Msg Type The type of IGMP message being filtered by this entry; one of
“Leave”, “Query”, or “Report”.
Action The action to take when an IGMP message matching the message
type and group address of this entry is received.
Matches The number of IGMP messages received that were matched by
this entry.
Reports,
Queries,
Leaves
The total number of IGMP messages of the specified type that
were received and processed on all the switch ports that this filter
is attached to.
Recd The number of IGMP messages of the specified type that were
received on all the switch ports that this filter is attached to.
Passed The number of IGMP messages of the specified type that were
received and accepted on all the switch ports that this filter is
attached to.
Dropped The number of IGMP messages of the specified type that were
received and discarded on all the switch ports that this filter is
attached to.
- Software Version 2.9.1 1
- 2 Release Note 2
- Release Licences 5
- Upgrading the GUI File 5
- Backwards Compatibility 6
- Overview of New Features 7
- AT-8624POE Fan Enhancements 9
- C613-10486-00 REV C 10
- VPN Configuration Wizards 11
- Command Changes 12
- System Enhancements 13
- Command Reference Updates 14
- Switching Enhancements 18
- PoE Firmware Upgrade 20
- SHDSL Enhancements 23
- Bridging Enhancements 26
- Software Version 2.9.1 27 27
- Training VLAN VID=2 28
- PPP Link 28
- Software Version 2.9.1 31 31
- Syntax SHow BRIDge 32
- Dynamic DNS Client 33
- Within a Subnet 34
- IP Debug Timeout 35
- Software Version 2.9.1 37 37
- Software Version 2.9.1 41 41
- Syntax SHow DDNS 42
- DHCP Enhancements 45
- DHCP Snooping Enhancements 50
- IP Multicasting Enhancements 55
- OSPF Enhancements 59
- BGP Enhancements 61
- IPv6 Enhancements 63
- ■ all static routes 64
- ■ all interface routes 64
- Firewall Enhancements 65
- Software Version 2.9.1 75 75
- ALG, use the command: 86
- Associations 88
- Changes to Local Commands 94
- IP Multicasting 95
- IP Multicasting 3 97
- IP Multicast Routing 98
- IP Multicasting 5 99
- PIM Dense Mode 100
- Configuring PIM Dense Mode 101
- General PIM-DM 102
- IP Multicasting 9 103
- PIM Sparse Mode 103
- 10 Software Reference 104
- Rendezvous point 105
- IP Multicasting 11 105
- 12 Software Reference 106
- Configuring PIM Sparse Mode 107
- Bootstrap router 108
- General PIM-SM 109
- IP Multicasting 17 111
- Configuring IGMP 112
- Static IGMP 113
- IGMP Proxy 114
- IGMP Snooping 116
- Downstream routers 117
- Fast Leave 118
- Query Solicitation 118
- IP Multicasting 25 119
- IGMP Filtering 120
- IGMP Throttling 122
- IP Multicasting 29 123
- Dynamic MVR 123
- Compatible MVR 123
- Immediate Leave 124
- Configuring MVR 124
- Configuration Examples 125
- Switch B 126
- Switch A 126
- Switch C 126
- Command Reference 134
- IP Multicasting enable pim 69 163
- [interface=vlan] 167
- ■ DVMRP Routers, 224.0.0.4 168
- ■ All PIM routers, 224.0.0.13 168
- ■ IGMP is enabled globally 170
- ■ the interface is active 170
- IP Multicasting set ip mvr 77 171
- 78 set pim Software Reference 172
- Syntax SHow IP IGMP DEBug 191
- Syntax SHow PIM COUnters 197
- Table 11 on page 104) 197
- Syntax SHow PIM INTerface 202
- VLAN (such as vlan1, vlan1-1) 202
- Syntax SHow PIM ROUte 205
- Syntax SHow PIM RPSet 212
- Introduction 217
- Link Layer Discovery Protocol 217
- Type Length Values 218
- Transmission and Reception 219
- Transmission 220
- Reception 220
- Storing LLDP Information 221
- Configuring LLDP 223
- Monitoring LLDP 224
- LLDP Triggers 225
- 802.1AB-2005 251
- LLDP neighbours is displayed 255
- MAC-Forced Forwarding 259
- 2 Software Reference 260
- MAC-Forced 261
- Forwarding with 261
- DHCP snooping 261
- Isolating clients using VLANs 262
- Manually adding 263
- ■ ARP packets 264
- Debugging 265
- Logging 265
- 8 Software Reference 266
- See Also show macff interface 277
- Syntax SHOW MACFF DATABase 278
Verwandte Produkte und Handbücher für Netzwerk-Switches Allied Telesis Rapier 16Fi-FX
(44 Seiten)
(51 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.064 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern