Allied-telesis FORMULA 8200 Bedienungsanleitung PDF herunterladen (Seite 18)

Connecting the Console

2-2

Connecting the Console

The RS232C console port permits you to connect a terminal or local

workstation for system management. The console terminal interface

is a DB9 (DCE) male connection.

Note

The console is required to confirm that the switch is configured and

operating correctly after installation.

Connect a VT-100 terminal or equivalent to the FORMULA 8200 using

a 9-pin null-modem RS232 serial cable. You can also use a DOS®,

Windows®, or UNIX® workstation running in terminal emulation

mode. The cable connection to the switch must have a female DB9

connector.

Terminal

Conﬁguration

To configure the terminal:

Use the following parameters:

❑ Baud rate: 9600

❑ Data bits: 8

❑ Stop bits: 1

❑ Parity: none

❑ Number of lines per page: 25

Viewing

Terminal

Conﬁguration

Using the CLI

Once you have completed the installation, you can then use the

following command to show the console parameters:

CONSOLE/SHOW - show console parameters

For a complete description and additional information about this

and other commands, see Chapter 5, Command Reference

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 163 164

Keine Kommentare

Allied-telesis FORMULA 8200 Bedienungsanleitung Seite 18