Allied-telesis AT-S79 Bedienungsanleitung PDF herunterladen (Seite 34)

Chapter 3: Basic Switch Parameters

34 Section I: Using the Menus Interface

Configuring System Administration Information

This section explains how to assign a name to the switch, as well as

specify the location of the switch and the name of the switch’s

administrator. Entering this information is optional.

To set a switch’s administration information, perform the following

procedure:

1. From the Main Menu, type B to select Basic Switch Configuration.

The Basic Switch Configuration Menu is shown in Figure 4 on page 30.

2. From the Basic Switch Configuration Menu, type A to select System

Administration Information.

The System Administration Configuration Menu is shown in Figure 6.

Figure 6. System Administration Configuration Menu

The Description parameter in the top portion of the menu displays the

model name of the switch. This parameter cannot be changed.

3. To set the system’s name, do the following:

a. Type N to select Set System Name.

The following prompt is displayed:

Enter system name>

AT-GS950/16 Local Management System

Basic Switch Configuration -> System Admin. Configuration Menu

Description: AT-GS950/16

Name:

Location:

Contact:

----------------------- <COMMAND> -----------------------------

Set System [N]ame

Set System [L]ocation

Set System [C]ontact Information

[Q]uit to previous menu

Command>

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 209 210

Keine Kommentare

Allied-telesis AT-S79 Bedienungsanleitung Seite 34