Allied-telesis AT-S79 Bedienungsanleitung PDF herunterladen (Seite 158)

Chapter 15: Port Configuration

158 Section II: Using the Web Browser Interface

Viewing and Configuring Ports Using the Port Configuration Page

This procedure explains how to configure the ports on the switch using the

Port Configuration page. This page allows you to view and configure the

parameter settings of all the switch ports at one time.

To configure the ports, perform the following procedure:

1. From the Basic Config menu, select Port Config.

The Port Configuration page is shown in Figure 43. The page lists all

the ports on the switch and their current settings.

Figure 43. Port Configuration Page

2. Adjust the port settings as needed. Not all parameters are adjustable.

The parameters are defined here:

Port Index

The port number. You cannot change this parameter.

Trunk

The trunk group number. A number in this column indicates that the

port has been added to a trunk. For information about configuring a

trunk, refer to Chapter 16, “Port Trunking” on page 167.

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 209 210

Keine Kommentare

Allied-telesis AT-S79 Bedienungsanleitung Seite 158