Allied-telesis AT-S79 Bedienungsanleitung PDF herunterladen (Seite 194)

Chapter 20: 802.1x Port-based Network Access Control

194 Section II: Using the Web Browser Interface

Configuring 802.1x Port-based Network Access Control

To configure 802.1x port-based network access control, perform the

following procedure:

1. From the Advanced Config menu, select 802.1x.

The 802.1x Configuration page is shown in Figure 55.

Figure 55. 802.1x Configuration Page

Note

The Initialize and Re-auth Initialize parameters are described in

Steps 5 and 6, respectively.

2. To select a port, do the following:

a. Click Go To Port and select the port you want to configure from

the pull-down menu. You can configure only one port at a time.

b. Click Apply.

The current settings for the selected port are displayed.

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 209 210

Keine Kommentare

Allied-telesis AT-S79 Bedienungsanleitung Seite 194