Allied-telesis AT-S79 Bedienungsanleitung PDF herunterladen (Seite 168)

Chapter 16: Port Trunking

168 Section II: Using the Web Browser Interface

Creating a Port Trunk

This procedure explains how to create a port trunk.

Note

Do not connect the cables of a port trunk to the ports on the switch

until after you have configured the ports on both the switch and the

end node. Connecting the cables prior to configuring the ports can

create loops in your network topology. Loops can result in broadcast

storms, which can adversely affect the operation of your network.

To create a port trunk, perform the following procedure:

1. From the Advanced Config menu, select Trunk Config.

The Trunk Configuration page is shown in Figure 46.

Figure 46. Trunk Configuration Page

If the switch does not contain a port trunk, all of the ports on the switch

are unchecked. If there is a port trunk, the ports in the trunk are

checked.

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 209 210

Keine Kommentare

Allied-telesis AT-S79 Bedienungsanleitung Seite 168