Allied-telesis AT-S41 Bedienungsanleitung PDF herunterladen (Seite 111)

AT-S41 User’s Guide

111

5. To modify the VLAN, use the commands at the bottom of the screen.

The commands are described below:

[C]hange a VLAN Name

This command is used to change a VLAN’s name. Type C and enter the

new name at the command prompt.

[M]odify Participation

This command is disabled when the switch is operating in the port-

based VLAN mode.

[A]dd VLAN Member

This command adds ports to the VLAN. Type A and then specify the

ports that you want to add as members of the VLAN. You can specify

the ports individually (e.g., 2,3,5), as a range (e.g., 7-9), or both (e.g.,

2,5,7-9). Press Enter.

Note

Any port that you add to a VLAN remains a member of the VLAN(s)

in which it is currently assigned. If you do not want the port to be a

shared port, you must remove it from the other VLANs.

[R]emove VLAN Member

This command removes ports from the VLAN. Type R and specify the

tagged ports that you want to remove from the VLAN. Press Enter.

You can specify the ports individually (e.g., 2,3,5), as a range (e.g., 7-9),

or both (e.g., 2,5,7-9).

Note

You cannot remove a port if it is not already a member of another

VLAN.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 235 236

Keine Kommentare

Allied-telesis AT-S41 Bedienungsanleitung Seite 111