Allied-telesis AT-S26 Bedienungsanleitung Seite 57

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 156
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 56
AT-S26 Version 2.0.1 User’s Guide
57
Configuring the RS232 Port
The default settings for the RS232 port on the front panel of the Ethernet
switch are as follows:
Baud rate: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
To change the settings for the RS232 port, perform the following
procedure:
1. From the Omega Main Menu, select System Configuration.
The System Configuration menu in Figure 8 on page 43 is displayed.
2. From the System Configuration menu, select Terminal Configuration.
The Terminal Configuration window in Figure 19 is displayed.
Figure 19 Terminal Configuration Window
Terminal Configuration Menu
> VT100-compatible / ANSI
Generic “dumb” terminal
> 8 data bits
7 data bits
> 1 stop bit
2 stop bits
> No parity
Odd parity
Even parity
> Full duplex (echo)
Half duplex (no echo)
Data rate (“baud” rate) ...
Return to System Configuration Menu ...
Seitenansicht 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 155 156

Kommentare zu diesen Handbüchern

Keine Kommentare