Allied-telesis AT-S26 Bedienungsanleitung PDF herunterladen (Seite 102)

Configuring Virtual LANs and Quality of Service

102

Creating a New Port-based or Tagged VLAN

This section contains the procedure for creating a new VLAN on a switch.

The procedure for creating a new VLAN consists of three phases:

❑ Phase 1:

— Name the VLAN.

— Assign a VLAN ID (VID) number to the VLAN.

— Designate which ports are to be members of the VLAN.

— Define which, if any, ports will be tagged ports.

❑ Phase 2:

— Remove the untagged ports from existing VLANs.

❑ Phase 3:

— Change the PVID of the untagged ports in the new VLANs to

match the VID.

The AT-9006 Series Gigabit Switches have one default VLAN, called

Default VLAN. The Default VLAN is assigned a VLAN ID. All the ports on

the switch are initially port-based (untagged) members of the Default

VLAN with a PVID of 1.

To create a new VLAN, perform the following procedures.

Phase 1

To perform Phase 1, do the following:

1. From the Omega Main Menu, select Virtual LANs/QoS.

The Virtual LAN/QoS menu in Figure 44 is displayed.

Figure 44 Virtual LAN/QoS Menu

Virtual LAN Menu

Virtual LAN definitions

Port to VLAN configuration

Assign Port Priority

Priority Weight configuration

Assign Management Port to VLAN

Return to Main Menu ....

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 155 156

Keine Kommentare

Allied-telesis AT-S26 Bedienungsanleitung Seite 102