Allied Telesis AT-8824 Installationsanleitung Seite 9
- Seite / 202
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Software Version 2.7.5 9
Software Version 2.7.5
C613-10454-00 REV A
set ppp
Syntax SET PPP==ppp-interface [OVER=physical-interface]
[AUTHENTICATION={CHAP|EITHER|PAP|NONE}]
[AUTHMODE={IN|OUT|INOUT}] [BAP={ON|OFF}]
[BAPMODE={CALL|CALLBACK}] [CBDELAY=1..100]
[CBMODE={ACCEPT|OFF|REQUEST}] [CBNUMBER=e164number]
[CBOPERATION={E164NUMBER|USERAUTH}]
[COMPALGORITHM={PREDICTOR|STACLZS}]
[COMPRESSION={ON|OFF|LINK}]
[CONFIGURE={value|CONTINUOUS}] [DEBUGMAXBYTES=16..256]
[DESCRIPTION=description] [DOWNRATE=0..100]
[DOWNTIME=time] [ECHO={ON|OFF|period}]
[ENCRYPTION={ON|OFF}] [FRAGMENT={ON|OFF}]
[FRAGOVERHEAD=0.100] [IDLE={ON|OFF|time}]
[INDATALIMIT={NONE|1..65535}] [IPPOOL={pool-name|NONE}]
[IPREQUEST={ON|OFF}] [LQR={ON|OFF|period}]
[MAGIC={ON|OFF}] [MAXLINKS=1..64] [MODEM={ON|OFF}]
[MRU={ON|OFF|256..1656}] [MSSheader=40..200]
[NULLFRAGTIMER=time] [ONLINELIMIT={NONE|1..65535}]
[OUTDATALIMIT={NONE|1..65535}] [PASSWORD=password]
[PREDCHECK={CRC16|CRCCCITT}]
[RECHALLENGE={ON|OFF|360..3600}] [RESTART=time]
[STACCHECK={LCB|SEQUENCE}] [STARENTITY=1..255]
[TERMINATE={value|CONTINUOUS}]
[TOTALDATALIMIT={NONE|1..65535}]
[TYPE={DEMAND|PRIMARY|SECONDARY}] [UPRATE=0..100]
[UPTIME=time] [USERNAME=username]
Description The new mssheader parameter specifies the amount of space, in bytes, that is
reserved for the header of a TCP packet. This amount is subtracted from the
MTU of the interface to define the Maximum Segment Size (MSS). The default
is 120 bytes.
The mssheader parameter may only be used with an Ethernet or VLAN
physical interface (PPPoE).
Examples To set a PPPoE interface that has a default MTU of 1492 to use an MSS value of
1292, use the command:
set ppp=0 over=eth0-any mssheader=200
- Software Version 2.7.5 1
- Overview of New Features 4
- MSS Clamping 5
- 8 MSS Clamping Release Note 8
- Software Version 2.7.5 9 9
- 10 MSS Clamping Release Note 10
- Syntax SHow PPP PPPoe 11
- Command changes 13
- Command Reference Updates 14
- Software Version 2.7.5 15 15
- Command Changes 18
- Syntax SHow IP 21
- DHCP Option 82 Relay 22
- Software Version 2.7.5 25 25
- Syntax SHow BOOTp RELAy 26
- IGMP Enhancements 28
- Filtering and Throttling 29
- Configuring IGMP 30
- IGMP Throttling 31
- Software Version 2.7.5 33 33
- Software Version 2.7.5 35 35
- OSPF Network Types 41
- [{FULl 45
- BGP Enhancements 46
- Automatic Summarising 48
- Aggregating Routes 50
- Software Version 2.7.5 53 53
- Syntax SHow BGP 55
- Syntax SHow BGP PEer[=ipadd] 56
- Software Version 2.7.5 59 59
- Software Version 2.7.5 61 61
- Firewall Enhancements 63
- UDP Port Timeout 65
- Software Version 2.7.5 67 67
- Software Version 2.7.5 73 73
- WAN Load Balancing 74
- VRRP Preemption Delay 75
- Software Version 2.7.5 77 77
- ..3600] [PRIOrity=1..254] 77
- Operating Principles 80
- Load Distribution Methods 81
- 1-4 Release Note 82
- WAN Load Balancing 1-5 83
- Healthcheck 84
- Assigning Weights 85
- Healthchecks 86
- Operation with Firewall 87
- 1-10 Release Note 88
- Before you 89
- Parameter Description 96
- ● eth (such as eth0, eth1) 100
- ● PPP (such as ppp0, ppp1) 100
- C613-10454-00 REV A 101
- Related Commands enable wanlb 109
- Syntax SHow WANLB 112
- Syntax SHow WANLB HEALthcheck 114
- ■ eth (such as eth0, eth1) 122
- ■ PPP (such as ppp0, ppp1) 122
- Filtering IP Routes 123
- 2-2 Release Note 124
- Introduction 125
- Types of Filters 126
- About AS Path Lists 127
- About Route Maps 127
- When to use 128
- About IP Route Filters 129
- Creating Filters 130
- Creating Route Maps for BGP 131
- How to create a route map 132
- ■ exclude the update message 133
- Example comparing 134
- AS path filter and 134
- Matching on 134
- Creating Route Maps for OSPF 138
- Creating IP Route Filters 141
- Applying Filters 142
- Applying AS path 143
- ■ prefix lists 148
- ■ AS path lists 148
- ■ route maps 148
- 2-28 Release Note 150
- [other-options] 150
- Filtering IP Routes 2-29 151
- The filtering 151
- Limitations of route 153
- Interface Routes 154
- Statically-Configured Routes 155
- Configuration Examples 156
- Using a Route Map 157
- Using an AS Path Filter 158
- Using Communities 160
- Command Reference 162
- Parameters for both 173
- Parameters for 173
- Parameters for set 176
- ■ an entire route map 181
- [PREfix=ipadd] 182
Verwandte Produkte und Handbücher für Netzwerk-Switches Allied Telesis AT-8824
(179 Seiten)
(32 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.048 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern