
SwitchBlade x8112 Chassis Switch and AT-SBx81CFC960 Card Installation Guide
Section III: Building a Stack with VCStack Plus 293
Figure 177. Installing the AT-StackOP/0.3 or AT-StackOP/9.0 Transceiver
4. Remove the dust cover from the transceiver, as shown in Figure 178.
Figure 178. Removing the Dust Cover from a Stacking Transceiver
5. Verify the position of the handle on the transceiver. If the transceiver is
in slot 1 or 3, the handle should be in the upright position, as shown in
Figure 179 on page 294. If the transceiver is in slot 2 or 4, the handle
should be in the down position.
Kommentare zu diesen Handbüchern