Allied-telesis SwitchBlade x8106 Bedienungsanleitung PDF herunterladen (Seite 172)

Chapter 7: Powering On the Chassis

172

Figure 128. Tightening the Handle Locking Screw

9. Before attaching the power wires from the power supply to the circuit

breaker in the wiring closet, check that the circuit breaker is off.

10. Connect the power wires to the circuit breaker.

11. Turn the circuit breaker on.

12. Turn the On/Off switch on the power supply to the On position. See

Figure 115 on page 160.

13. Do one of the following:

 If the chassis has two AT-SBxPWRSYS1 DC Power Supplies,

repeat this procedure to power on the second power supply.

 Otherwise, go to “Monitoring the Initialization Process” on

page 177.

Handle locking

screw

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 239 240

Keine Kommentare

Allied-telesis SwitchBlade x8106 Bedienungsanleitung Seite 172