Allied-telesis SwitchBlade x8106 Bedienungsanleitung Seite 121

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 240
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 120
SwitchBlade x8106 Chassis Switch Installation Guide
121
Figure 77. Tightening the Thumb Screws on an Ethernet Line Card
8. Tighten the two screws with a # 2 Phillips-head screwdriver to secure
the line card to the chassis.
Allied Telesis recommends tightening the screws to 5 inch-lbs.
9. Repeat this procedure to install the remaining Ethernet line cards.
10. After installing the line cards. go to “Installing the Blank Slot Covers” on
page 122.
Seitenansicht 120
1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 239 240

Kommentare zu diesen Handbüchern

Keine Kommentare