Allied-telesis FORMULA 8200 Bedienungsanleitung PDF herunterladen (Seite 18)

Troubleshooting

Checking LED Status

The switch has system LEDs (Status and Power), located on the front panel,

that indicate the switch’s overall operational status. For the location of these

LEDs, see the encircled area in Figure 9.

Figure 9: Switch System LEDs

Additionally, each FX port has a set of LEDs to the right. For a closeup view of

the FX LEDs, see Figure 10.

Figure 10: FX Port LEDs

Table 3 describes how these LEDs report on the switch and ports’ status, and

what you need to do in case of a problem.

Table 3: LED States and Recommended Action

LED Description and Action Required

Status Flashing green means the switch’s system-wide operations are

normal.

Solid green means the switch software is locked up and you

probably cannot log in. Reboot the switch.

Flashing amber means the switch is completing a DRAM test

during a power on self test (POST); otherwise, there may be

problems. Reboot. If the LED state does not change, contact Allied

Telesyn’s Technical Support.

Solid amber means the switch is still functioning, but with

problems. Try to determine the cause of the problem without

rebooting the switch. If all else fails, reboot.

10/100BASE-T NETWORK PORTS

9101112

10/100BASE-T NETWORK PORTS

13 14 15 16

10/100BASE-T NETWORK PORTS

1234

10/100BASE-T NETWORK PORTS

5678

STATUS

POWER

RESET

GREEN - LINK

YELLOW - DIAG

GREEN - ACTIVITY

YELLOW - COLLISION

RS-232 TERMINAL PORT

100 BASE-FX

12345678

STATUS

POWER

RESET

Activity

Collision

Link

Diag

Fiber_Book Page 14 Tuesday, February 17, 1998 1:43 PM

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis FORMULA 8200 Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis FORMULA 8200