Allied-telesis AT-VIEW PLUS 2.3 DEVICE MANAGEMENT Bedienungsanleitung PDF herunterladen (Seite 207)

Allied Telesyn AT-VIEW PLUS

DEVICE MANAGEMENT

PN 613-50507-00 Rev C Page 207 of 224

AT-PB100 Series Media Converter Modules

PB101 PB102 PB103/1 PB103/2

LED State Description

DUP

Green

Gray

The media converter is operating in full-duplex mode.

The media converter is operating in half-duplex mode.

ML Green The Missing Link feature is enabled.

Note - The Port A Mode parameter for these modules has a fixed value of 'full' and cannot be

modified.

Note - The current firmware version does not allow the Port B Mode parameter to be set to 'full'

from the default value of 'half'. Likewise, it cannot be set to 'half' if it was set to 'full' using the

Omega interface.

Note - Expect the DUP LED to be green when it should be gray and vice-versa when the Port B

Mode parameter is set to 'auto'. This is because the current firmware version is unable to provide

information on the negotiated mode for Port B.

1 2 ... 202 203 204 205 206 207 208 209 210 211 212 ... 223 224

Keine Kommentare

Allied-telesis AT-VIEW PLUS 2.3 DEVICE MANAGEMENT Bedienungsanleitung Seite 207